Hanging lines with varying distances between pipe and calling – allowing vertical alignment / adjustment of line even after installation. Suitable for condenser water lines, fire lines, sanitary lines, etc.
U Bolt is a U shaped bolt with two threaded arms protruding from a curved base. Zinc plating retards the corrosion rate in normal atmosphere.
Material
:
Mild Steel Zinc Electro Plated
Diameter Range
:
1/4" – 1”
Pipe Size
:
1/4” – 20”
Applications
:
Recommended for support, anchor or guide of heavy loads, attaching pipes to machines; often employed in power and process plant service.
Fully Threaded Rod ( F.T. Rod )
Material
:
Mild Steel Zinc Electro Plated
Diameter Range
:
M6, M8, M10, M12, M16, M20 & M24
Length Range
:
2 Meters
Applications
:
Fully threaded rods are recommended for use when threads are needed for the full fastener length, and most commonly used with two nuts. Fully threaded rods are frequently used in petrochemical industry, pipeline flanges, oil and gas pumps, and sprinkler systems.
Rawal Bolt
Material
:
Yellow Passivated Zinc Plated Steel
Size
:
M6 x 50, M8 x 65, M10 x 70, M12 x 90
Applications
:
Best suited for use in Concrete. Some typical applications include :
Hand Rails
Ductwork Support
Pipework Support
Racks/Shelves
Holding down machinery
Structural Steel
Rawal Bolt Eye
Material
:
Yellow Passivated Zinc Plated Steel
Size
:
M6 x 50, M8 x 65, M10 x 70, M12 x 90
Applications
:
Best suited for use in Concrete and Stone. Some typical applications include :
Hanging fans
As a support to cables, ropes, etc.
Taper Bolt
Description
:
Taper bolts are an assembly of a taper-headed metal cone, washer, lead sleeve and nut. When it is installed, the taper-head metal cone expands the lead sleeve to fill all the pores and crevices of the material in which it is set. Taper bolts work when you insert it into a predrilled hole in the base material and then turn the nut to pull the working end of the sleeve up through the sleeve. The anchor is then expanded and anchored securely in the concrete, brick or block.
Material
:
Yellow Passivated Zinc Plated Steel
Size
:
M6 x 50, M8 x 65, M10 x 70, M12 x 90
Applications
:
Best suited for use in Concrete, Brick and Block. Some typical applications include :
Handrails
Ductwork
Battens
Door Frames
SDS Cover Caps
Description
:
Coloured caps to suit hexagonal self drilling screws with 16mm washers.
Material
:
Polyamide
Size
:
16mm
Features
:
Provides a snug, protective, concealed finish to Self Drilling Screw
Suryashakti Infotech Pvt. Ltd.